For PCMCIA ATA flash card and other storage cards, please choose Model IIA which has one PCMCIA slot for type I, II or III ATA flash cards.  You need PC card adapters for CF, smartmedia, SD/MMC, memory stick, etc. 

Note: This model does not work well with Lexar brand compact flash cards

• Perfect solution for accessing various flash cards on desktop or book-size PC via IDE/ATAPI interface.

• Support Type I/II compact flash cards and microdrives.

• Fully compatible with ATAPI removable/re-writable media interface and PIO mode 4.

• Card can be inserted/extracted dynamically without shutting down the system.

• Provides front panel fits both 3.5" and 5.25" (mounting bracket required for 5.25" bay) desktop drive bay.

• Active LED indicator of Access (Read/Write).

• Adopt native driver provided by Windows98/98SE/ME/NT 4.0+SP6 /2000 & XP.

	Data transfer rate: Theoretically, the data transfer rate of IDE bus is 16.6 MB/SEC. However, the real data transfer rate is lower because of the limitation of flash memory card.
	Is the drive bootable?  Some computers (not all) can simply select "Boot from ZIP" option available from BIOS setup. The device support only one drive letter like Zip drive. You can't make the drive as C:. Manufacturer does not claim all computers can boot from this drive and they will not support!
	Does it run under plain DOS (not under DOS-box in Windows)?  No. The device is an ATAPI device and requires device driver to operate. There is no plan to develop DOS driver for it at this moment.

The IIC- IDE Interface CF Card Reader provides you the easiest and fastest way to access your CompactFlash cards or microdrives. IIC utilizes IDE/ATAPI interface, which is generic driver supported by Windows system, let you install and use the reader easier than ever before.

IIC supports PIO Mode 4, and the max. data transfer rate up to 16.6 MB per sec.. IIC also supports Plug n’ Play, and no additional software driver required to install it on platforms with Windows systems.
  

• Socket:
  type I/II CompactFlash Card socket x 1

• System Requirements:
  IBM PC compatible computer
  *with IDE/ATAPI support x 1                                                                     
  *free 3.5"  disk drive bay x 1
  *Windows 98/98 SE/ME/NT 4.0 + SP6/2000/XP

• Interface:
  Internal IDE/ATAPI device

• Power supply:
  DC+5v from system’s power supply

• Dimensions:
  Housing- D147.8 x W101.6 x H25.4 mm
  (Standard 3.5" device)

• Data transfer rate:
  16.6 MB/sec. max. (PIO Mode 4).

• Environment:
  Temperature: Operating temperature: 0^oC~70^oC
  Storage temperature: -40^oC~70^oC

Relative humidity: Operating RH: 50%
Storage RH: 95%

Safety Standards Compliance:

• FCC Class B

• CE
  

• 1 year limited warranty

• Tech Support from PSI and the manufacturer