PSI/C-1 Tech PCMCIA SRAM Card

Product Overviews

PSI/C-1 Tech's SRAM cards features high speed, re-programmable, non-volatile solid state memory technology with low power consumption for maximum battery life and reliable data retention in a wide range of mobile and embedded applications.

Each SRAM card is designed with the dual back-up battery system - a replaceable but non-rechargeable 3V lithium battery (primary battery) and an on-board rechargeable but non-replaceable battery (secondary battery) for data retention. This design allows replacement of primary battery without data loss for approximately 20 minutes. In the event, digital signals on the card were used to alarm the user whether the primary battery should be replaced to prevent the loss of stored data. The write protect switch on the SRAM card provides a useful measure of protection from inadvertently over-writing stored data.

Compliant to the industry standard PCMICA/JEIDA specifications and in support of standard DOS file system, the SRAM card is well suited for data storage in Embedded PC, Palmtops, Sub-notebook PC, PDA, PCA, and Digital Cameras.  Our factory manufacture and market SRAM products in a variety of form factors and capacities.  Additionally, our factory offers customized SRAM solutions tailored to specific application, device, and design requirements.

ORDERING INFORMATION

Part Number Guide:

5V SRAM PC card - without Attribute Memory
  P/N      -    Description
SN5064-P   -   64KB 5V SRAM card
SN5128-P   -   128KB 5V SRAM card
SN5256-P   -   256KB 5V SRAM card
SN5512-P   -   512KB 5V SRAM card
SN5001-P   -   1MB 5V SRAM card
SN5002-P   -   2MB 5V SRAM card
SN5004-P   -   4MB 5V SRAM card
SN5006-P   -   6MB 5V SRAM card

w/ Attribute Memory (SA5XXX-P)

3.3V volt cards are only on quantity special-order basis. 

FEATURES    

• Industry standard PCMCIA 2.x compliant

• PCMCIA Type I form factor

• Solid state memory technology for high read/write speed of 200ns

• Extremely rugged and reliable

• Low power operation for maximum battery life

• Dual battery design for ease of use and superior data retention

• BVD1/BVD2 pins used as battery voltage level detection signals

• Battery case lock system

  • Secure battery in the card

  • Ease of battery change

• Mechanical Write protect switch prevents overwriting valuable data

• Supports standard DOS file system

• Applications for PC, PDA, PCA, Industrial Control, Embedded System, instrumentation, Communication

• Options:

  • Attribute memory (2Kbytes, 8Kbytes)

  • Industrial temperature version

  • Military environment version

  • Combination card of Flash and SRAM version

SPECIFICATIONS

Dimensions:

• Type I card: 85.6mm(L) x 54mm(W) x 3.3mm(H)

• Weight: 42.5 g or 1.5 oz

Storage Capacities:

• 128K, 256K, 512K, 1M, 2M, 4M, and 6M

System Compatibility:

• Hewlett Packard 95/100/200LX

• Apple Newton Message Pad

• SONY Magic Link

• SHARP Zaurus

• CASIO Z-7000

• HP Omnibook series

• FATO CL408 Printer

• Chinon’s ES-3000 Digital Cameras

• IBM compatible Notebook PCs, Laptops, Palmtops, or Hand-held devices, etc.

Operating System Support:

• DOS, Microsoft Windows 3.x , 95, 98, Me, 2000 & XP. (To use under Windows 2000 & XP, the SRAM cards must have 2KB attribute.)

Performance:

• Access time: 200ns (Max.)

Main Battery:

• BR2325 Rayovac/Panasonic

• CR2325 FDK

• CR2025 Toshiba/Panasonic/FDK

Operating Voltage: 5V ± 5%

Power Consumption:

• Active Mode: 120 mA (max)

• Standby mode: 0.4 mA (max)

Environment conditions:

• Operating temperature: -20°C to 70°C

• Storage temperature: -40°C to 85°C

• Relative Humidity: 95% (Max.)

PRICE                                                                           

Please click here for up-to-date prices.
    

• 1 year warranty

• Tech Support from PSI and respective manufacturers

• If you need to access your data on the SRAM cards using a Windows PC, please check here.